Live chat or 
S8910U3000 : Resideo Honeywell S8910U3000 Universal Hot Surface Ignition Module
| SKU: | S8910U3000 |
| Compare at: | $366.66 |
| You Save: | 41% |
Universal hot surface ignition module replaces multiple field installed hot surface ignition modules supplied by Resideo Honeywell, White-Rodgers, Robertshaw and Johnson. Uses a 120 VAC igniter. Includes cross reference, instructions, and accessories for easy replacement.
Replaces over 800 White-Rodgers, Robertshaw and Resideo Honeywell hot surface ignition models.
For 120 Vac (up to 5.0A) surface igniter (Norton 201/271 or equivalent).
S8910U 3000 Series has LED status indicator and microammeter ports for easy trouble shooting
For local (single rod) or remote (dual rod) rectification type flame sensing.
Contains easy-to-use cross reference and instructions plus the accessories required to replace the existing hot surface ignition module.
Provides one or three ignition trials (four-second or seven-second trials) per call for heat.
Field selectable number of ignition trials and trial time based on unit being replaced.
Igniter warm up time: 7 (12 seconds second and third trial), 17 (27 seconds second and third trial), 34, or 45 seconds
Product Specifications
| -40 C to +79 C | |
| -40 F to +175 F | |
| (2) 96 sec (32 Seconds Prepurge and 64 seconds interpurge) | |
| Design Certified | |
| 5 1/4 in. high x 4 1/16 in. wide x 1 15/16 in. deep | |
| 133 mm high x 103 mm wide x 49 mm deep | |
| 24 Vac | |
| 1.5 sec. | |
| Single Rod or Two Rods | |
| 50 Hz; 60 Hz | |
| The number of trials for ignition and trial time is determined by the dip switch selection. | |
| Line Voltage (120 VAC) Hot Surface Element (Norton Model 201 or 270) | |
| Direct Hot Surface Ignition | |
| 1 or 3 | |
| 4 sec. or 7 sec. | |
| 4 sec. or 7 sec. | |
| 2A | |
| 32 seconds | |
| Natural or LP | |
| VR8205, VR8305 |
Product Downloads
Product Specifications
Installation Instructions