VS820A1054 : Honeywell Standing Pilot Gas Valve, 3/4" x 3/4" x 1/2", 750 mV, Standard Opening
No Longer Available
Search for similar products
SKU: | VS820A1054 |
Honeywell VS820A1054 3/4" x 3/4" x 1/2", 750 mv, Standard Opening,Standing Pilot Gas Valve. This gas control combines a Lite-Rite manual gas cock, safety shutoff Pilotstat assembly, millivoltage automatic valve operator, and optional gas pressure regulator. They require the use of a 750 mV Powerpile generator (thermopile). The generator, heated by the pilot burner flame, provides the electrical energy to operate the combination gas control. A millivoltage thermostat with suitable accessory controls completes the automatic control system for the heating appliance.
Features:
Include pilot flow adjustment screw as well as Two 3/4" x 1/2" reducer bushing; One 1/2" x 3/8" reducer bushing
Easy to install, adjust and service; all adjustments and connections are accessible from top of control.
Add separate energy cutoff (ECO) where codes call for dual safety shutoff.
Complete safety shutoff on pilot flame failure.
LITE-RITE (OFF-PILOT-ON) lighting sequence.
Mounts 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
Product Specifications
CSA International: 112395 | |
UL Component Recognized MCCZ2.MH5323 | |
Straight-through, multi-tapped with 1/2 in. right and left outlets plugged | |
At 1 in. wc p.d.-- 335,000 BTU/hr: 34,000 BTU/hr minimum, 425,000 BTU/hr maximum | |
4 3/4 in. high x 4 1/16 in. wide x 3 3/16 in. deep | |
121 mm high x 103 mm wide x 81 mm deep | |
Combination screw and 1/4 in. male quick connects. | |
Standing Pilot | |
3/4 in. NPT x 3/4 in. NPT with 1/2 in. NPT side outlets | |
Standard Opening | |
0 C to 79 C | |
32 F to 175 F | |
Compression fitting for 1/4 in. OD tubing | |
3.5 kPa | |
1/2 psi | |
Standard | |
3.5 in. WC | |
0.87 kPa | |
Outlet pressure tap: 1/8 in. NPT with plug | |
Natural | |
750 mV |
Product Downloads
Installation Instructions
Product Specifications