S9200U1000 : Resideo Honeywell S9200U1000 Universal Hot Surface Ignition Integrated Furnace Control
SKU: | S9200U1000 |
Compare at: | $316.60 |
You Save: | 41% |
Resideo Honeywell Universal Hot Surface Ignition Integrated Furnace Control. This Universal Integrated Furnace Control offers universal compatibility and diagnostics. It replaces a large number of furnace control models in single-stage warm air furnaces. Uses 120Vac hot surface igniter. Includes instructions and special wire harnesses for easy replacement.
Features:
Cross reference and wire harnesses provided for simple replacement over 195 existing furnace controls.
Main burner ignition using a 120V hot surface igniter.
Flame rectification circuit to monitor flame presence.
Monitoring of system pressure switch, high temperature limit, and rollout functions.
Appliance operation/safety requirements controlled via microprocessor.
Controls circulating fan motor based on appliance requirements, in response to a conventional low voltage thermostat.
LED system status, performance and diagnostic indication.
Twinning capability
Used with Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Resideo Honeywell VR8205 recommended.
Product Specifications
14.5FLA / 25LRA max @120Vac | |
0 or 60 seconds | |
5 seconds | |
Any 24Vac contactor rated at 1.0A or less | |
2 Seconds max @ 1µA | |
60 Hz | |
60, 90, 120, or 180 Seconds | |
30 or 60 seconds | |
17/27 or 30/30 seconds | |
5 A resistive @ 120VAC | |
Three, two tries if flame is not sensed | |
2.2FLA / 25LRA max @120Vac | |
120 Vac (97-132 Vac) | |
24V (18-30 Vac) | |
3 | |
0% to 95% non-condensing | |
-40 C to +79 C | |
-40 F to +175 F | |
15 seconds | |
30 seconds | |
4, 6, or 8 seconds | |
Standard Induction-Type Circulating Fan |
Product Downloads
Installation Instructions- English