RP7517B1024 : Honeywell Electric to Pneumatic Transducer

You Are Here: Home > RP7517B1024

1 of 1
Click Main Image to Enlarge
Grids Shown are 1" x 1"

$798⁸⁸

Special Order - Call for Lead Time

Usually 5 weeks delivery

Please note that Special Order items may be subject to restocking charges or non-returnable. Please visit our Return Policy page for more information.

SKU:	RP7517B1024
Compare at:	$1,038.54
You Save:	24%

Honeywell RP7517B1024 Electric to Pneumatic Transducer. Electronic-Pneumatic Transducers are used in electronic-pneumatic control systems to convert a proportional electric output signal from a controller into a direct-acting, proportional pneumatic signal.

Features:
Screw mounting or snap rail (models with cover).
Factory calibrated.
Dual barb fittings.
High accuracy.
Without cover, external transformer required, 24 Vac, 50/60 Hz, (3 wire)

Product Specifications

Airflow Usage:	0.025 scfm (117mL/s)
Dimensions (in):	2 7/16 in. wide x 3 3/8 in. high x 1 7/8 in. deep
Dimensions (mm):	62 mm wide x 86 mm high x 48 mm deep
Maximum Safe Operating Pressure (psi):	30 psi, maximum
Maximum Safe Operating Pressure (kPa):	205 kPa, maximum
Temperature Range (F):	131 F, maximum
Temperature Range (C):	55 C, maximum
Electrical Connections (in):	screw terminals for 14 to 22 gauge wire
Operating Humidity Range (%RH):	5 to 95% RH
Volts (V):	24 Vac external transformer
Pressure Range (psi):	0 to 18 psi; Output--3 to 15 psi
Pressure Range (kPa):	0 to 125 kPa; Output--21 to 103 kPa
Air Connections:	Dual barb-fittings for 1/4 in. or 5/32 in. O.D. plastic tubing
Capacity:	0.45 scfm (211 mL/s)
Current:	16 mA

Product Downloads
Product Specifications
Installation Instructions