MN7505A2001 : Honeywell Damper Actuator, 44 in-lb, Non-Spring Return, Floating Modulating
$27285
Special Order -
Call for Lead Time
Usually 5 weeks delivery
Please note that Special Order items may be subject to restocking charges or non-returnable. Please visit our Return Policy page for more information.
SKU: | MN7505A2001 |
Compare at: | $354.71 |
You Save: | 24% |
Honeywell MN7505A2001 Damper Actuator, 44 lb-in, Non Spring Return, Modulating, 2-10 Vdc, 24 Vac. This 44lb-in Non-Spring Return Direct Coupled Actuator (DCA) is a control actuator that provides floating or proportioning control for valves and dampers. The proportioning actuators accept a current or voltage signal from a controller to position the damper or valve at any chosen point between fully open and fully closed.
Product Specifications
Maximum Stall-- 70 lb-in. | |
Maximum Stall-- 8 Nm | |
-18 C to +50 C | |
20 F to 125 F | |
2-10 Vdc; 4-20 mA | |
5.55 in high x 3.39 in wide x 3.0 in deep | |
141 mm high x 86 mm wide x 76 mm deep | |
Screw terminals | |
NEMA 1 | |
Yes, 201052B | |
Non-Spring Return | |
50 Hz; 60 Hz | |
45K ohm (2-10 Vdc signal), 536 ohm (4-20 mA signal) | |
Declutch mechanism | |
Driving (dB(A) @ 1m)-- 45 | |
Direct Coupled | |
5 to 95% RH, non-condensing | |
Driving-- 5.4 VA | |
By switch | |
Aluminum Hub, two set screws | |
3/8 to 1/2 in. square or round | |
10 to 13 mm square/round | |
90 degrees | |
24 Vac ±20% | |
Driving @ 60 Hz-- 90 sec | |
35 lb-in. | |
4 Nm | |
UL873, Plenum Rated |
ML7161A2008