L8124L1011 : Resideo Honeywell Triple Aquastat Relay Controller, High Limit, Horizontal Mount
Usually 3 weeks delivery
Please note that Special Order items may be subject to restocking charges or non-returnable. Please visit our Return Policy page for more information.
SKU: | L8124L1011 |
Compare at: | $704.77 |
You Save: | 16% |
Resideo Honeywell L8124L1011 Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems, including domestic hot water service.
Features :
Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems.
Provide multizone control by using a separate circulator and R845 Relay for each zone.
Include diaphragm powerhead and Micro Switch™ assembly that respond to temperature changes in boiler water.
Mount directly to boiler.
Select models include large transformers and extra terminals for supplying power to low voltage zone valves.
Require 24 Vac thermostat with heat anticipator set at 0.2 A (plus current draw of gas valve on L8124E).
TRADELINE models include tube of heat conductive compound and range stops.
Product Specifications
High limit : 10 F fixed; low limit: 10-25 F adj. | |
4 3/8 in. high x 6 1/8 in. wide x 3 1/16 in. deep | |
111 mm high x 156 mm wide x 78 mm deep | |
Quick-Connect / Screw | |
At Full Load-- Line Voltage: 7.4 A @ 120 Vac: 3.7 A @ 240 Vac; At Locked Rotor-- Line Voltage: 44.4 A @ 120 Vac: 22.7 A @ 240 Vac | |
At Full Load-- 7.4 A @ 120 Vac: 3.7 A @ 240 Vac; At Locked Rotor-- 44.4 A @ 120 Vac: 22.2 A @ 240 Vac | |
60 Hz | |
1378 kPa on outside of immersion well, 690 kPa on capsule if inserted directly. | |
200 psi on outside of immersion well, 100 psi on capsule if inserted directly. | |
0 to 95% RH, non-condensing | |
High Limit-- 54 C to 116 C; Low Limit-- 43 C to 104 C | |
High Limit-- 130 F to 240 F; Low Limit-- 110 F to 220 F | |
Single Pull, Single Throw: High & Low Limit | |
-34 C to 66 C at switches; 129 C at sensing element | |
-30 F to 150 F at switches; 265 F at sensing element | |
24 Vac; 120 Vac |
Product Downloads
Product Specifications
Installation Instructions