V8043G1125 : Honeywell V8043G1125 Home 1/2" Inverted Flare, 24V, Normally Closed, With End Switch, Less Adapters, Zone Valve
SKU: | V8043G1125 |
Compare at: | $196.99 |
You Save: | 26% |
Honeywell Home V8043G1125 1/2" Inverted Flare, 24V, Normally Closed, With End Switch, Zone Valve. Two-way on-off low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water. Valve designed for cycling (not constantly powered on) applications.
Features:
Manual opener for valve operation on power failure; valve returns to automatic position when power is restored.
All models may be installed without disassembling the valve.
Compact construction for easy installation.
Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system.
Actuator motor may be replaced without removing the valve body or draining the system.
Product Specifications
Two position | |
52 C Maximum | |
125 F Maximum | |
CSA Certified: File 1322 | |
Two-way, Straight-through | |
3.5 Cv | |
3 Kv | |
Inverted Flare | |
0.32A | |
Normally Closed | |
4 in. high x 3 5/8 in. wide x 2 3/8 in. deep | |
102 mm high x 92 mm wide x 60 mm deep | |
18 in. leads | |
457 mm leads | |
50 VA pilot duty @ 24 V; 4.4 A running with 26.4 A inrush @ 120 V | |
10 C to 93 C | |
50 F to 200 F | |
50 Hz; 60 Hz | |
Brass | |
EPDM rubber | |
Buna-N (NBR) Rubber Ball | |
Brass | |
Stainless Steel | |
138 kPa | |
20 psi | |
5 to 95% relative humidity, non-condensing. | |
DN15 | |
1/2 in | |
862 kPa | |
125 psi | |
Nominal Open--15 sec | |
Spring return to close | |
24 Vac; Power Consumption--7.7 VA |
Product Downloads
Sales Brochures
Product Specifications