V8043G1018 : Honeywell V8043G1018 Home 3/4" Sweat, 2-Way, 3.5 Cv, 125 PSI, End Switch, Normally Closed Zone Valve
SKU: | V8043G1018 |
Compare at: | $210.99 |
You Save: | 40% |
Honeywell Home V8043G1018 Zone Valve with End Switch 2 Way On-Off Actuator & Valve Assembly Normally Closed. Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water. Valve designed for cycling (not constantly powered on) applications such as Hydronic Control of Baseboard Radiation, convectors, fan-coil units, Etc.
Features:
Uses a two-wire, 24-volt control circuit and requires a SPST thermostat.
Manual opener for valve operation on power failure; valve returns to automatic position when power is restored.
All models may be installed without disassembling the valve.
Compact construction for easy installation.
Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system.
Actuator motor may be replaced without removing the valve body or draining the system.
Product Specifications
Two position | |
52 C Maximum | |
125 F Maximum | |
CSA Certified: File 1322 | |
Two-way, Straight-through | |
3.5 Cv | |
3 Kv | |
Inverted Flare | |
0.32A | |
Normally Open | |
18 in. leads | |
457 mm leads | |
50 VA pilot duty @ 24 V; 4.4 A running with 26.4 A inrush @ 120 V | |
10 C to 93 C | |
50 F to 200 F | |
60 Hz | |
No | |
Brass | |
EPDM rubber | |
Buna-N (NBR) Rubber Ball | |
Brass | |
Stainless Steel | |
138 kPa | |
20 psi | |
5 to 95% relative humidity, non-condensing | |
DN20 | |
3/4 in | |
862 kPa | |
125 psi | |
Nominal Open--15 sec | |
Spring return to open | |
24 Vac; Power Consumption--7.7 VA |
Product Downloads
Sales Brochures
Product Specifications