02-A-3KOR-00 : Amaircare Roomaid Mini Portable HEPA Air Purifier, With VOC Orange, Up to 250sq/ft

Amaircare Roomaid Mini Portable HEPA Filtration System With a Carbon VOC Filter.
Roomaid is ideal for Daycares, Babies & Kids Rooms and other areas where space may be limited. The mini is a lighter and more compact version of the Most Popular Amaircare Roomaid air purifier.

Choose your Color to match your Décor. Green, Orange, Pink or Blue ** See Alternative Products Below

Air Cleaned through the filter each Hour ACH per Sq. ft. (50 sq. ft. 4.8 ACH), (75 sq. ft. 3.2 ACH), (100 sq. ft. 2.4 ACH), (250 sq. ft. 1 ACH)

Three-Stage Filtration
Stage 1: Pre-Filter - Removes large dust particles
Stage 2: HEPA Filter - 99.97% efficient @ 0.3 microns. Removes dust, pollen, bacteria, animal dander, attached viruses, cigarette smoke, radon daughters, and more.
Stage 3: VOC Filter - Removes hazardous VOCs that may off-gas from things made with chemicals such as cleaners, paints, carpets, and furniture.
360° Polluted air intake at the upper deck improves the overall air purifier performance. 330° clean air outlet is located at the lower section of the unit.
For small rooms up to 250 square feet.
Up To 5 Year Filter Life- HEPA filter lasts up to 5 years and needs no maintenance.
Reusable Pre-Filter- Washable foam pre-filter can be used over and over.
2-Speed Settings
5 Year Limited Warranty

Common Applications: Homes & Bedrooms, Offices & Workplaces, Babies Rooms, Vehicles, Travelling & Hotels, Areas Where Space May Be Limited.

Dimensions: 8.5”D x 6.1875”H
Weight: 4.4 lbs
Voltage: 12 v DC, 7’ Cord, North American Type K Plug, 12v DC to 115 AC Adaptor
Air Flow:16 CFM (low speed), 32 CFM (high speed)
Watts: 5 Watts
Amps: 0.05 Amps
Frequency: 60 Hertz
Noise Level: 47 Decibals
Certifications: UL, CSA
Materials: 24 Gauge Cold Rolled Steel
Finish: Powder Coated, Baked Enamel
Colour: Orange
Intake (Upper Section): Three-Stage Filter Assembly
Outflow (Lower Section): 330°
Filter Life: Pre-Filter Washable (12 Months), VOC Filter 6-12 Months, HEPA Filter 2-5 Years

Prefilter Replacement
1. Turn the unit off and unplug it.
2. Remove the used prefilter and carefully discard it in a plastic bag.
3. Line up the seam in the prefilter with the receptacle at the back of the unit. Pull the new prefilter over the unit so it snugly covers the screen.
4. Plug the unit in and turn it on.

HEPA Cartridge Replacement
1. Turn the unit off and unplug it.
2. Turn the unit upside down. With one hand holding the HEPA cartridge, pull the motor/fan housing away. Discard the cartridge in a plastic bag.
3. Sit the motor/fan housing right side up and seat the gasket in the groove.
4. Place the HEPA cartridge on the motor/fan housing and align the plugs in the cartridge with the holes in the housing. Once the holes are aligned press firmly on the top of the cartridge to secure it to the housing.
5. Plug the unit in and turn it on.