VC8711ZZ11 : Honeywell VC8711ZZ11 Home 2 Position Actuator For Vc Series, 24V, 2Wire, W/endswitch N.o or N.c
SKU: | VC8711ZZ11 |
Compare at: | $153.54 |
You Save: | 16% |
Honeywell Home VC8711ZZ11 Actuator for VC Series valves, W/ End Switch. Normally Open or Normally Closed. uSE WITH VC Series Valves, 1000 Series 2-way and 6000 Series 3-way. Control central heating and cooling, fan coil systems, radiators and convectors. Depending on the model, it can be controlled by a low voltage SPST or SPDT switch, pulse-width modulated 24 Vac signal, or floating input, modulating controller.
Features:
Use with two-way or three-way valves.
Double insulated actuator.
Five foot plenum-rated cable.
Quick and easy replacement of moving parts.
Actuator head installation does not require draining the system.
Selectable/switchable electronic fail safe normally open or normally closed.
Available with valve bodies with 1000-series 2-way and 6000-series 3-way cartridges for new construction.
All VC Series actuator-valve combinations provide 60 psi close-off.
Product Specifications
Valve | |
0 C to 65 C | |
32 F to 150 F | |
Molded strain relief | |
Two position; SPST | |
2.8 in. high x 3.7 in. wide x 2.7 in. deep | |
70 mm high x 94 mm wide x 68 mm deep | |
Cable | |
39 in | |
1 m | |
Stays in place | |
95 C | |
203 F | |
60 Hz | |
1 | |
Lever | |
400 kPa | |
60 psid | |
Direct Coupled | |
5 to 95% RH, non-condensing | |
Driving-- 6 VA | |
Self-alignment | |
0.4 in | |
10 mm | |
24 Vac | |
SPDT | |
2.2A (5 to 110 Vac)/1.0A (110 to 277 Vac) Inductive; Min. DC switching capability: 5 mA @ 24 Vac. | |
Driving @ 60 Hz-- 6 sec |
Product Downloads
Product Specifications
Installation Instructions