VC4011ZZ11 : Honeywell VC4011ZZ11 Home 2 Position, Line Voltage, Normally Open Or Closed, VC Series Zone Valve Actuator
SKU: | VC4011ZZ11 |
Compare at: | $134.58 |
You Save: | 16% |
Honeywell Home VC4011ZZ11 2 Position, Line Voltage, Normally Open Or Closed, VC Series Zone Valve Actuator. To be used to control central heating and/or cooling systems, fan coil systems, radiators and convectors. Depending on the model selected, it can be controlled by either a low or line voltage SPST or SPDT controller such as a room thermostat.
Features:
Use with two-way or three-way valves.
Minimal actuator power consumption.
Quick-connect or one meter cable electrical connections available.
Quick and easy replacement of moving parts.
Actuator head installation does not require draining the system.
On/Off models with six second nominal timing
Use two-position actuators with 1000 Series 2 way and 6000 Series 3-way VC valve bodies only.
All VC Series actuator-valve combinations provide 60 psi close-off.
Product Specifications
Valve | |
0 C to 65 C | |
32 F to 150 F | |
CSA Certified: LR1322-367 | |
89/336/ECC, 73/23/EEC | |
UL Recognized, File# MH11826 | |
Molded strain relief | |
Two position; SPST | |
2.8 in. high x 3.7 in. wide x 2.7 in. deep | |
70 mm high x 94 mm wide x 68 mm deep | |
Cable | |
39 in | |
1 m | |
IP40,Double Insulated | |
Stays in place | |
95 C | |
203 F | |
50 Hz; 60 Hz | |
Lever | |
400 kPa | |
60 psid | |
Direct Coupled | |
5 to 95% RH, non-condensing | |
Driving-- 6 VA | |
Self-alignment | |
0.4 in | |
10 mm | |
100V to 130V | |
Driving @ 60 Hz-- 6 sec |
Product Downloads
Product Specifications
Installation Instructions