V800A1161 : Resideo Honeywell Standing Pilot Gas Valve, 1/2" x 1/2", 24VAC, Standard Opening, Single Stage, 3.5" WC
No Longer Available
Search for similar products
SKU: | V800A1161 |
Resideo Honeywell V800A1161 1/2" x 1/2", 24 Vac, Standard Opening, 3.5" WC, Standing Pilot Gas Valve. This valve is used on gas fired standing pilot appliances with 30 mV thermocouple. These gas controls include a manual gas valve, safety shutoff, single millivoltage automatic operator, pressure regulator, pilot gas filter and flow adjustment, pressure tapping, and thermocouple connector.
Features:
Mounting is 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
Include pilot flow adjustment screw.
Easy to install, adjust and service; all adjustments and connections are accessible from top of control.
Add separate energy cutoff (ECO) where codes call for dual safety shutoff.
Complete safety shutoff on pilot flame failure.
LITE-RITE (OFF-PILOT-ON) lighting sequence.
ECO connector for V800 models. Part No. 392451-1.(Sold Separately)
Product Specifications
CSA International: 112395 | |
UL Component Recognized MCCZ2.MH5323 | |
Straight-through | |
At 1 in. wc p.d.-- 225,000 BTU/hr: 23,000 BTU/hr minimum, 225,000 BTU/hr maximum | |
4 3/4 in high x 4 1/16 in. wide x 3 3/16 in. deep | |
121 mm high x 103 mm wide x 81 mm deep | |
Combination screw and 1/4 in. male quick connects. | |
60 Hz | |
1/2 in. x 1/2 in | |
Standard Opening | |
0 C to 79 C | |
32 F to 175 F | |
Compression fitting for 1/4 in. OD tubing | |
3.5 kPa | |
1/2 psi | |
Standard | |
3.5 in. WC | |
0.87 kPa | |
Outlet pressure tap: 1/8 in. NPT with plug | |
24 Vac |
Product Downloads
Product Specifications
Installation Instructions